PPB-8

Code

PPB8-10 -> 9.6 kWh variant

PPB8-15 -> 14.4 kWh variant

Outlet socket

15A - 230V

USB Charger 5V 2.1A

Inlet

10A – 230V (Trickle Charge)

4kW Solar Panel

Inverter

1 x 48V / 8kW

Charging Time

7.5 hours (15 kWh)

Inverter

Rated Inverter Power (Continuous)

8kW

Surge Capacity (Peak)

16kW for 5 Secs

Nominal Output Voltage

230VAC

Frequency

50Hz

AC Voltage Regulation (Battery Mode)

230VAC ± 5%

Battery Nominal Voltage

48VDC

Overload Protection

100ms @ ≥205% load 5s @ ≥150% load

10s @ 110%~150% load

AC Input

Nominal 230VAC Range 170-280VDC

Nominal Input Frequency

50Hz

Max Feed Through Current

10A

Lithium Batteries

Battery Nominal Voltage

48VDC

Battery Voltage Window

40.5-54VDC

Battery Nominal Capacity

4800Wh

Battery Type

LiFePO4 (LFP)

Batter Manufacturer

FNSPower

Battery Number

3

Battery Management System

Yes

Operating Temperature

Charge

0℃ ~ 45℃

Discharge

-20℃ ~ 50℃

Solar Panel Inlet

PV Rated Power

4kW

Max. PV Open Circuit Voltage

500VDC

PV Array MPPT Voltage Range

90-450VDC

Max PV Input Current

18A

Startup Voltage

80VDC ± 5VDC

Dimensions & Weight

Dimensions

972 x 516 x 931 mm LENGTH x WIDTH x HEIGHT

Dry Weight

PPB8-10 -> 163 kg

PPB8-15 -> 205 kg

ON BOARD CONTROL PANEL EQUIPPED WITH:

Battery Monitor

Run and Charging Time SOC monitoring

Voltage/Current/Power monitoring

Battery ON/OFF switch

Fitted

Battery Isolator

Fitted

USB Charger

Fitted

RCBO Protection

Fitted

Distribution Panel

3x 15A 1Ph 230V 3 Pin GPOs (RCBO Protected)

1x 10A 1Ph 230V 3 Pin Inlet Trickle Charge (RCBO Protected)

1x Solar Input Touch Safe Connector (Makinex PV Adaptor Cable required)

2 x USB Charger 5V 2.1A

Standard Features

Removable top cover for access to batteries, inverter, and electrical wiring (maintenance should not, however, be required)

Renogy Battery Management Display

Self-actuating brake – holds the unit on inclines up to 8 deg

Durable HDPE bumpers to avoid damage to the main sheet-metal structure

Lifting eye allowing for easy access from trailers

Tie-down strap locations on the top and the bottom (both the front and back of unit)